Seltek ware house

What is the Fastie System

Fastie is a fast compact quick connection system to tie to the ejector to the mould tool.

Dramatically reducing mould change time, saving you valuable time and money.

The ejector can quickly connect mechanically to the mould tool and is opened with a pneumatic air supply.

  • Faster Mould Changes
  • Hardened Steel Materials
  • Various Thread Sizes Available
  • Flexible Modular Installation
  • No Mould Modifications Required
  • Reduced Wear, parts stay connected during moulding cycles
     SELECT COMPONENTS 
    Click for Couplings
    Click for Tool Studs  
    Click for Centre Air Feed Adaptors

    X
    SKU
    BB-GRP-FAST
  • Fastie is a fast compact quick connection system to tie to the ejector to the mould tool.

    Dramatically reducing mould change time, saving you valuable time and money.

    The ejector can quickly connect mechanically to the mould tool and is opened with a pneumatic air supply.

  • Faster Mould Changes
  • Hardened Steel Materials
  • Various Thread Sizes Available
  • Flexible Modular Installation
  • No Mould Modifications Required
  • Reduced Wear, parts stay connected during moulding cycles
     SELECT COMPONENTS 
    Click for Couplings
    Click for Tool Studs  
    Click for Centre Air Feed Adaptors

  • More Information & Product Selection



    Operation

  • Mould tool is mounted to the fixed platen
  • The Fastie coupler(s) are permanently mounted to the machine ejector piston or ejector plate.
  • The moving platen is closed, connected and then the quick connect locking mechanism snaps mechanically onto the tool mounted stud.
  • To release the Fastie, Close the tool, APPLY air to the coupler to open and withdraw the fixed platen and ejector.

  • What you will need

    For single ejector machines you will need a 1 x Coupler1 X Tool Stud 1 X Centre air adaptor (which is used to get air to the rear of the coupler)

    For ejector plate system you will need two (2) or four (4) Couplers and Studs. Air can be supplied directly to the rear of the couplings.

  • Please note you will need to supply 5-8 Bar of workshop air and a pneumatic toggle switch to turn the coupler on and off.
  •  

     SELECT COMPONENTS 

    Click for Couplings    -   Click for Tool Studs   -   Click for Centre Air Feed Adaptors

    Grouped product items
    Part Number Product Name Stock Item    
    W-FASTIE Choose from above SELECT COMPONENTS Links or CALL