The Thinswitch (Liquid Resistant) - Ejector Safety

The Liquid resistant THINSWITCH® Limit Switch To verify ejector plate return before closing the mould. Mount inside ejector housing and wire to machine controls.

Can also be used for core slides or any place where space is limited.

The liquid resistant switch uses the same mounting hole locations as the original Thinswitch.

Downloads
	Smartflow Liquid Resistant Thinswitch Catalogue
	Smartflow Colour Brochure (German)
	Smartflow Colour Brochure (English)
	Smartflow Thinswitch Instructions

SKU

BB-GRP-S-002

The Liquid resistant THINSWITCH® Limit Switch To verify ejector plate return before closing the mould. Mount inside ejector housing and wire to machine controls.

Can also be used for core slides or any place where space is limited.

The liquid resistant switch uses the same mounting hole locations as the original Thinswitch.

Skip to the end of the images gallery

Skip to the beginning of the images gallery

More Information & Product Selection

Smartflow® Thinswitch® Liquid-Resistant Limit Switch is designed to verify ejector plate return in areas where occasional water or oil spray is present. The Thinswitch helps prevent accidental mould close in injection moulding applications by providing a position switch that is tied to the injection moulding machine control. The liquid resistant switch uses the same mounting hole locations as the original Thinswitch.

The Thinswitch has been tested for reliability over 10 million cycles without failure. Two switches can be used in series for larger moulds to ensure the ejector plate return, preventing costly mould damage.

Features and Benefits

Prevents costly mould damage

Small size - 2.15" L x 1.5" W x 0.18" thick

Fits behind ejector plate

Requires only 2 screw holes

Very economical to install

Ten million cycle mechanical life

Adjustable operating point

Electrical capacity at 250V AC

5 Amps Resistive, 4 Amps Inductive SPDT

Approximately 1.8M wire leads stripped and tinned

Optional high temperature model- up to 121°C (Standard 79.4°C)

U.S. Patent No. 5,446,252

Note* The Thinswitch is designed to fit in the standard gap of imperial ejector plates 0.18" Thick. Otherwise it may be necessary to mill a small pocket.

Items are normally from stock for next day delivery

To order only – Please allow 7-10 working days to despatch

Grouped product items
Part Number	Product Name	Stock Item
BB-SW-T-222-LR	Thinswitch - Liquid Resistant - Standard - 79.4 Degrees C
BB-SW-HT-291-LR	Thinswitch - Liquid Resistant - High Temperature - 121 Degrees C

The Thinswitch (Liquid Resistant) - Ejector Safety

The Liquid resistant THINSWITCH® Limit Switch To verify ejector plate return before closing the mould. Mount inside ejector housing and wire to machine controls.

The Liquid resistant THINSWITCH® Limit Switch To verify ejector plate return before closing the mould. Mount inside ejector housing and wire to machine controls.

Categories

Mailing list

Mailing list