Seltek ware house

The Thinswitch - Ejector Plate Safety

THINSWITCH® Limit Switch To verify ejector plate return before closing the mould. Mount inside ejector housing and wire to machine controls.

Can also be used for core slides or any place where space is limited.  A simple way to prevent very expensive mould tool breakages.

X
SKU
BB-GRP-S-001

THINSWITCH® Limit Switch To verify ejector plate return before closing the mould. Mount inside ejector housing and wire to machine controls.

Can also be used for core slides or any place where space is limited.  A simple way to prevent very expensive mould tool breakages.

More Information & Product Selection

Features and Benefits

  • Prevents costly mould damage Small size - 2.15" L x 1.5" W x 0.18" thick
  • Fits behind ejector plate
  • Requires only 2 screw holes
  • Very economical to install
  • Ten million cycle mechanical life
  • Adjustable operating point
  • Electrical capacity at 250V AC
  • 5 Amps Resistive, 4 Amps Inductive SPDT
  • Approximately 1.8M wire leads stripped and tinned
  • Optional high temperature model- up to 121C (Standard 79.4 C)
  • U.S. Patent No. 5,446,252

  • Note* The Thinswitch is designed to fit in the standard gap of imperial ejector plates 0.18" Thick. Otherwise it may be necessary to mill a small pocket.

    Grouped product items
    Part Number Product Name Stock Item    
    BB-SW-T-222 Thinswitch - Standard - 79.4 Degrees C
    BB-SW-HT-291 Thinswitch - High Temperature - 121 Degrees C