IPS Soft Drop Mould Chutes
- Keep Parts Where You Want Them
- Reduce Scrap/Contamination
- Soft Landing For Delicate Products
- IPS Soft Drop In-Line Standard Sizes
- IPS Soft Drop Right Angle Standard Sizes
- See Below For Custom Chutes
£213.00 – £402.00 + Vat
Description
IPS Soft Drop Mould Chutes stop your parts from scattering randomly in the “drop zone”. Mould Chutes ensure your parts land on your conveyor or in your packing case and not on the floor.
The unique design of the soft drop mould chute lets it attach to the machine chassis under the mould.
As the mould opens your delicate parts fall gently into the Soft Drop chute and are slowly transferred on to the conveyor.
For pricing table: Select Right Angle Or In-Line Chute while order.
Available Sizes (pdf files)
IPS Soft Drop In-Line Standard Sizes
IPS Soft Drop Right Angle Standard Sizes
For none standard sizes use our IPS Soft Drop Custom Order Form
Mould Chutes are made of durable plastic with a PVC lining in the bottom to protect even the most delicate moulding.
The unique construction will not absorb oil or grease and is abrasion, puncture, and tear resistant.
Soft Drop Chutes
IPS Soft Drop Mould Chutes stop your parts from scattering randomly in the ‘drop zone’. Mould Chutes ensure your parts land on your conveyor or in your packing case and not on the floor.
Mould Chutes are made of durable plastic with a PVC lining in the bottom to protect even the most delicate moulding. The unique construction will not absorb oil or grease and is abrasion, puncture, and tear resistant.
Each Mould Chute is easily cleaned using simple household cleaners and there are no concertina folds to trap mouldings or dirt.
All Mould Chutes can be attached to the machine using either magnets or custom support harnesses. Velcro straps allow precise adjustment of the chute to prevent loss of parts from uncontrolled ejections.
Features
Less Scrap
Reduce Contamination
Increase Profits
Easy Installation
Quick Access to the Mould
Movable to Other Machines
If one of our standard size chutes won’t meet your needs, or if you require a special design, we will make them to any size you want.
Installation
Easy to install
Easy to remove
Simple assembly of hardware and magnets is required
Magnets are positioned on the outer edge of the machine frame (in-line chutes) or the platen/tool (right angle chutes) and attach to the magnet using Velcro straps
Chute Kit Contains
1 Mould Chute
Mounting hardware required
The number of attaching magnets for the Chute