Stamixco Mixing Nozzle

Better Melt Flow! More Cash Flow

We are living in a world of consumption. On a daily basis, Product Specialists and Injection Moulders must deal with many different tools, formulations, colours additives and mastebatches.

Production rate, yield and high quality are Keys for Success.

The StaMixCo SMN Injection Moulding Mixing Nozzle contains eight (8) very efficient static mixing elements that homogenize the polymer melt during injection.

This homogenization is achieved by the continuous division of the molten polymer and its recombination when processed through the geometric structure of the mixing bars.

Downloads
	Plasticising Components Colour Brochure
	Why Stamixco Static Mixing Elements (5mb)
	Stamixco Static Elements Grid Protection Disk
	Stamixco Static Elements Installation Instructions
	Stamixco Static Elements Nozzle Body Order-Quote Form
	Stamixco Static Elements Brochure
	Stamixco Static Elements Sizing Questionnaire Form

SKU

ST-GRP-STA-ASS

Better Melt Flow! More Cash Flow

We are living in a world of consumption. On a daily basis, Product Specialists and Injection Moulders must deal with many different tools, formulations, colours additives and mastebatches.

Production rate, yield and high quality are Keys for Success.

Skip to the end of the images gallery

Skip to the beginning of the images gallery

More Information & Product Selection

The SMN mixing elements are extremely resistant due to their monolithic cast construction where the mixing bars are joined to each other and to the external ring wall via a single molten metal pour.

They are made of heat treated high strength 17-4 PH stainless steel and are virtually indestructible.

Pressure drop through the static mixing elements is low.

Reduction of colour concentrate additives of as much as 30% can be achieved with comparable part colour density

Mixing Quality

The optimum polymer melt quality for injection moulding is reached when at each location inside the polymer melt volume, a uniform distribution of colorant, additives and melt temperature exists. Using the StaMixCo SMN mixing elements, 80% of mixing (CoV = 0.2) is reached after eight elements and 97% (CoV = 0.03) after 16 elements