Smartflow Thinswitch – Ejector Plate Safety
- Positive Confirmation - Ejector Return
- Fits behind ejector plate
- Adjustable operating point
- Stops Expensive (Very) Tool Crashes
£94.10 – £106.30 + Vat
Description
The Smartflow THINSWITCH® Limit Switch To verify ejector plate return before closing the mould.
A simple way to prevent very expensive mould tool breakages.
Download: Mould Safety Switch Brochure
Smartflow-Product-Summary-In-English.pdf
Smartflow Product Summary En français
Smartflow Product Summary Auf Deutsch
Smartflow Product Summary En Español
Smartflow Product Summary Po Polsku
Mount inside ejector housing and wire to machine controls.
Can also be used for core slides or any place where space is limited.
Features and Benefits
- Prevents costly mould damage Small size – 2.15″ L x 1.5″ W x 0.18″ thick
- Fits behind ejector plate
- Requires only 2 screw holes
- Very economical to install
- Ten million cycle mechanical life
- Adjustable operating point
- Electrical capacity at 250V AC
- 5 Amps Resistive, 4 Amps Inductive SPDT
- Approximately 1.8M wire leads stripped and tinned
- Optional high temperature model- up to 121C (Standard 79.4 C)
- U.S. Patent No. 5,446,252
Note* The Thinswitch is designed to fit in the standard gap of imperial ejector plates 0.18″ Thick. Otherwise it may be necessary to mill a small pocket.