Layout Table~~~~7991~7991~~

The RMA Module~The New Athena Series RMA is a microprocessor-based, single-zone temperature controller specifically designed for runnerless moulding applications. It features an easy-to-use operator keypad, two LED displays, and discrete indicators for heat output, alarm, degree F/C indication, manual and closed loop mode.~

The Athena Series RMA is a microprocessor-based, single-zone temperature controller specifically designed for runnerless moulding applications.

It features an easy-to-use operator keypad, two LED displays, and discrete indicators for heat output, alarm, degree F/C indication, manual and closed loop mode.

Features

Compatible with industry standard control modules and mainframes.

Accepts Type J thermocouple

Bumpless auto/manual transfer

CompuStep® bake out feature prevents moisture at startup

Built-in loop break for open heater, shorted triac, reversed or shorted thermocouple

Open thermocouple break protection with jumper-selectable shutdown or average power output based on operation

Preset alarms at 30 o F (17 o C)

SafeChangeTM “hot swap” feature allows safe removal and replacement of module

CE compliant

RMA, IMP, RMB and RMC controllers are fully interchangeable with each other and many other modular units supplied into the market by other manufacturers.

Controllers can be purchased individually but for new systems a control cabinet, power and thermocouple cables will need to be specified. Please see our full system details or contact us to to find out about our complete package deals.

~RMA 15A Module|AT-RMA-E-15|~7991~7993~~

The RMT Module~The Athena Series RMT is our latest microprocessor-based, dual-zone temperature controller specifically designed for runnerless moulding applications effectively doubling the zone count per module without doubling the price. It features two easy-to-use operator keypads, four LED displays, and discrete indicators for heat output, alarm, degree F/C indication, manual and closed loop mode.~

The NEW Athena Series RMT is a microprocessor-based, dual-zone temperature controller specifically designed for runnerless moulding applications effectively doubling the zone count per module without doubling the price.

It features two easy-to-use operator keypads, four LED displays, and discrete indicators for heat output, alarm, degree F/C indication, manual and closed loop mode.

Features

Accepts Type J thermocouple

Bumpless auto/manual transfer

CompuStep® bake out feature prevents moisture at startup

Built-in loop break for open heater, shorted triac, reversed or shorted thermocouple

Open thermocouple break protection with jumper-selectable shutdown or average power output based on operation

Preset alarms at 30oF (17oC)

SafeChangeTM “hot swap” feature allows safe removal and replacement of module

CE compliant

RMA, IMP, RMB and RMC controllers are fully interchangeable with each other and many other modular units supplied into the market by other manufacturers.

Controllers can be purchased individually but for new systems a control cabinet, power and thermocouple cables will need to be specified. Please contact us to purchase modules or to find out about our complete package deals.

~RMT 15A Module|AT-RMT-E-15|~7991~7995~~

The IMP Module~Athena's IMP Series Modules use microprocessor-based circuitry to perform all required control functions. Units have built-in diagnostics and are fully self-tuning-set point temperatures are maintained without the need to manually preset or adjust the control temperature. This control module is also available as a portable single-zone controller, the PIM series.~

Athena’s Series IMP Modules use microprocessor-based circuitry to perform all required control functions. Units have built-in diagnostics and are fully self-tuning – set point temperatures are maintained without the need to manually preset or adjust the control temperature .

This control module is also available as a portable single-zone controller, the IMPP series.

Features

Simultaneous digital setpoint and digital temperature indication

Available in single zone, 15- and 30-amp temperature controllers, as well as for multi-zone temperature control systems

Compatible with all previous “G” series main frames

CompuStep® feature removes moisture from the heater before full power is applied

CompuCycle® feature improves response time, reduces thermal fatigue and prolongs heater life by applying AC power smoothly and continuously

Manual control for non-thermocouple applications, provides standby or “weekend” heat or to manually control temperature if a thermocouple fails.

Diagnostic and protection features include power “on,” power to load, manual made, and over/under temperature, plus indicators and system protection for reversed and open thermocouples

RMA, IMP, RMB and RMC controllers are fully interchangeable with each other and many other modular units supplied into the market by other manufacturers.

Controllers can be purchased individually but for new systems a control cabinet, power and thermocouple cables will need to be specified. Please contact us to purchase modules or to find out about our complete package deals.

~IMP 15A Module|AT-IMP-E-15|~7991~7997~~

The RMB Module~The Athena Series RMB, part of the new Series RM family, is a micro- processor-based, single-zone temperature controller specifically designed for runnerless moulding applications. It features an easy-to-use operator keypad, two LED displays, and three discrete indicators for heat-current, alarm and manual mode.~

The Athena Series RMB, part of the new Series RM family, is a microprocessor-based, single-zone temperature controller specifically designed for runnerless moulding applications. It features an easy-to-use operator keypad, two LED displays, and three discrete indicators for heat-current, alarm and manual mode.

Features

Compatible with existing Athena “G+” and DME “G” Series main frames

Accepts Type J or Type K thermocouple input (jumper selectable)

Auto-tuning, with adjustable proportional band and rate

Bumpless auto/manual transfer

C o m p u S t e p® bakeout feature prevents moisture at start up

Built-in loop break, short, open, and reverse thermocouple protection

Optional triac failure protection

Ground-fault protection (U.S. model)

Preset alarms at 30° F (17°C)

Jumper-selectable self-start mode

Current monitor feature displays average current to load

C E - compliant

RMA, IMP, RMB and RMC controllers are fully interchangeable with each other and many other modular units supplied into the market by other manufacturers.

Controllers can be purchased individually but for new systems a control cabinet, power and thermocouple cables will need to be specified. Please contact us to purchase modules or to find out about our complete package deals.

~RMB 15A Module|AT-RMB-E-15|~7991~7999~~

The RMC Module~The Athena Series RMC brings new and highly productive benefits to injection moulders looking for a modular hot runner controller that’s flexible, easy to set up, and simple to operate. Using the popular Modbus® communications protocol, the next-generation RMC gives users the ability to set or change all zones, either remotely from a desktop computer, from a Palm® handheld device, or (with the ALL command) from any other individual RMC module in the mainframe.~

The Athena Series RMC brings new and highly productive benefits to injection moulders looking for a modular hot runner controller that’s flexible, easy to set up, and simple to operate.

Using the popular Modbus® communications protocol, the next-generation RMC gives users the ability to set or change all zones, either remotely from a desktop computer, from a Palm® handheld device, or (with the ALL command) from any other individual RMC module in the mainframe.

Features

Compatible with all D-M-E Company’s G SERIES and SMART SERIES®, ITC, MCS, Yudo®, and Incoe® brand mainframes.

Choice of three default modes for open thermocouple condition

Built-in triac safety protection

Accepts J or K thermocouple input (jumper selectable)

SafeChange TM circuit “hot swap” feature allows safe removal and replacement of module

Compu-Step® bakeout feature prevents moisture at start up

Built-in loop break, short, open, and reverse thermocouple protection

“Boost” mode for temporary % of power output increase

Ground-fault protection

Adjustable setpoint limits

Stores highest temperature detected

Current monitor feature displays average current to load

CE - compliant

RMA, IMP, RMB and RMC controllers are fully interchangeable with each other and many other modular units supplied into the market by other manufacturers.

Controllers can be purchased individually but for new systems a control cabinet, power and thermocouple cables will need to be specified. Please contact us to purchase modules or to find out about our complete package deals.

~RMC 15A Module|AT-RMC-E-15|~7991~8001~~