Invotec Solutions

sales@invotecsolutions.co.uk

+44  (0) 1908 322 282
Fax: +44 1604 422 900

What is the Fastie System

More Views

What is the Fastie System

Fastie is a fast compact quick connection system to tie to the ejector to the mould tool.


Dramatically reducing mould change time, saving you valuable time and money.


The ejector can quickly connect mechanically to the mould tool and is opened with a pneumatic air supply.


  • Faster Mould Changes
  • Hardened Steel Materials
  • Various Thread Sizes Available
  • Flexible Modular Installation
  • No Mould Modifications Required
  • Reduced Wear, parts stay connected during moulding cycles

     SELECT COMPONENTS 

    Click for Couplings

    Click for Tool Studs  

    Click for Centre Air Feed Adaptors

  • More Information & Product Selection




    Operation


  • Mould tool is mounted to the fixed platen

  • The Fastie coupler(s) are permanently mounted to the machine ejector piston or ejector plate.

  • The moving platen is closed, connected and then the quick connect locking mechanism snaps mechanically onto the tool mounted stud.

  • To release the Fastie, Close the tool, APPLY air to the coupler to open and withdraw the fixed platen and ejector.



  • What you will need


    For single ejector machines you will need a 1 x Coupler1 X Tool Stud 1 X Centre air adaptor (which is used to get air to the rear of the coupler)


    For ejector plate system you will need two (2) or four (4) Couplers and Studs. Air can be supplied directly to the rear of the couplings.


  • Please note you will need to supply 5-8 Bar of workshop air and a pneumatic toggle switch to turn the coupler on and off.

  •  


     SELECT COMPONENTS 


    Click for Couplings    -   Click for Tool Studs   -   Click for Centre Air Feed Adaptors

    Availability: In stock

    Indicates items normally held in stock
    Indicates non-stock items to order

    Part Number Description Stock Item
    W-FASTIE Choose from above SELECT COMPONENTS Links or CALL