Invotec Solutions

sales@invotecsolutions.co.uk

+44  (0) 1908 322 282
Fax: +44 1604 422 900

IPS Mould Curtains

More Views

IPS Mould Curtains

IPS Mould Curtains stop your parts from scattering randomly within the mould open space by keeping them within the desired "drop zone".


Watch mould curtains in action - Now we have made available a short video along with a simple case study to help you decide. Click here for the video


Mould Shields crystal clear plastic curtain allows you to observe your moulding area, and monitor your parts production in progress. With an in-service life expectancy of 3 million cycles Mould Shields have a rapid payback based on scrap reduction and increased good production output.

More Information & Product Selection



As the mould opens and closes the Mould Shield correspondingly unwinds and recoils itself with each press cycle. Since Mould Shields are easily attached and removed as necessary, they can be quickly moved from press to press to meet changing production demands.

If a standard size or multiple stacked shield won't meet your needs, we will make you a shield to any size you want. For vertical presses, where you might need to enclose 3 sides of your mould, we have special kits to meet your application. Phone our technical support for your free installation guide and user notes.

Features

Reduces Scrap
Eliminates Contamination
Increases Profits
Easy Installation
Quick Access to the Mould
Movable to Other Presses


Installation
Mould curtains are easy to install simple to remove.
Some assembly of hardware and magnets is required.
Magnet with locating post is positioned on the outer edge of the mould
The Mould Shield Attachment Handle latches onto the magnet locating post
For larger vertical sizes Mould Shields can be stacked one on top of the other.
Install a spacer between the magnet and Mould Shield when using an air blast during mould opening (allowing air to enter the vortex that is created and prevent the Shield being pulled into the mould open space)

Kit Contains
2 Shields
Mounting hardware
Required number of attaching magnets for the Shield size


Availability: In stock

Indicates items normally held in stock
Indicates non-stock items to order

Part Number Description Stock Item
W-SR-MS-020 MS20 Mould Shield pack of two with magnets 20 x 60 cm
W-SR-MS-030 MS30 Mould Shield pack of two with magnets 30 x 60 cm
W-SR-MS-040 MS40 Mould Shield pack of two with magnets 40 x 60 cm
W-SR-MS-050 MS50 Mould Shield pack of two with magnets 50 x 60 cm
W-SR-MS-060 MS60 Mould Shield pack of two with magnets 60 x 60 cm
W-SR-MS-080 MS80 Mould Shield pack of two with magnets 80 x 60 cm
W-SR-MS-100 MS100 Mould Shield pack of two with magnets 100 x 60 cm
W-SR-MS-120 MS120 Mould Shield pack of two with magnets 120 x 60 cm